最新消息:20210917 已从crifan.com换到crifan.org

【整理】git push的用法/语法/帮助文件

Git crifan 3781浏览 0评论

通过:

git help push

可以查看到git push的语法和参数含义:

git help push

GIT-PUSH(1)                                                             Git Manual                                                             GIT-PUSH(1)

NAME
       git-push - Update remote refs along with associated objects

SYNOPSIS
       git push [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>]
                  [--repo=<repository>] [-f | --force] [-v | --verbose] [-u | --set-upstream]
                  [<repository> [<refspec>...]]

DESCRIPTION
       Updates remote refs using local refs, while sending objects necessary to complete the given refs.

       You can make interesting things happen to a repository every time you push into it, by setting up hooks there. See documentation for git-receive-
       pack(1).

OPTIONS
       <repository>
           The "remote" repository that is destination of a push operation. This parameter can be either a URL (see the section GIT URLS below) or the
           name of a remote (see the section REMOTES below).

       <refspec>...
           The format of a <refspec> parameter is an optional plus +, followed by the source ref <src>, followed by a colon :, followed by the destination
           ref <dst>. It is used to specify with what <src> object the <dst> ref in the remote repository is to be updated.

           The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as master~4 or HEAD (see
           gitrevisions(7)).

           The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must be named.
           If :<dst> is omitted, the same ref as <src> will be updated.

           The object referenced by <src> is used to update the <dst> reference on the remote side, but by default this is only allowed if the update can
           fast-forward <dst>. By having the optional leading +, you can tell git to update the <dst> ref even when the update is not a fast-forward. This
           does not attempt to merge <src> into <dst>. See EXAMPLES below for details.

           tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>.

           Pushing an empty <src> allows you to delete the <dst> ref from the remote repository.

           The special refspec : (or +: to allow non-fast-forward updates) directs git to push "matching" branches: for every branch that exists on the
           local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode if no
           explicit refspec is found (that is neither on the command line nor in any Push line of the corresponding remotes file---see below).

       --all
           Instead of naming each ref to push, specifies that all refs under refs/heads/ be pushed.

       --mirror
           Instead of naming each ref to push, specifies that all refs under refs/ (which includes but is not limited to refs/heads/, refs/remotes/, and
           refs/tags/) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs will be force
           updated on the remote end, and deleted refs will be removed from the remote end. This is the default if the configuration option
           remote.<remote>.mirror is set.

       -n, --dry-run
           Do everything except actually send the updates.

       --porcelain
           Produce machine-readable output. The output status line for each ref will be tab-separated and sent to stdout instead of stderr. The full
           symbolic names of the refs will be given.

       --delete
           All listed refs are deleted from the remote repository. This is the same as prefixing all refs with a colon.

       --tags
           All refs under refs/tags are pushed, in addition to refspecs explicitly listed on the command line.

       --receive-pack=<git-receive-pack>, --exec=<git-receive-pack>
           Path to the git-receive-pack program on the remote end. Sometimes useful when pushing to a remote repository over ssh, and you do not have the
           program in a directory on the default $PATH.

       -f, --force
           Usually, the command refuses to update a remote ref that is not an ancestor of the local ref used to overwrite it. This flag disables the
           check. This can cause the remote repository to lose commits; use it with care.

       --repo=<repository>
           This option is only relevant if no <repository> argument is passed in the invocation. In this case, git push derives the remote name from the
           current branch: If it tracks a remote branch, then that remote repository is pushed to. Otherwise, the name "origin" is used. For this latter
           case, this option can be used to override the name "origin". In other words, the difference between these two commands

               git push public         #1
               git push --repo=public  #2

           is that #1 always pushes to "public" whereas #2 pushes to "public" only if the current branch does not track a remote branch. This is useful if
           you write an alias or script around git push.

       -u, --set-upstream
           For every branch that is up to date or successfully pushed, add upstream (tracking) reference, used by argument-less git-pull(1) and other
           commands. For more information, see branch.<name>.merge in git-config(1).

       --thin, --no-thin
           These options are passed to git-send-pack(1). A thin transfer significantly reduces the amount of sent data when the sender and receiver share
           many of the same objects in common. The default is --thin.
       -q, --quiet
           Suppress all output, including the listing of updated refs, unless an error occurs. Progress is not reported to the standard error stream.

       -v, --verbose
           Run verbosely.

       --progress
           Progress status is reported on the standard error stream by default when it is attached to a terminal, unless -q is specified. This flag forces
           progress status even if the standard error stream is not directed to a terminal.

       --recurse-submodules=check
           Check whether all submodule commits used by the revisions to be pushed are available on a remote tracking branch. Otherwise the push will be
           aborted and the command will exit with non-zero status.

GIT URLS
       In general, URLs contain information about the transport protocol, the address of the remote server, and the path to the repository. Depending on
       the transport protocol, some of this information may be absent.

       Git natively supports ssh, git, http, https, ftp, ftps, and rsync protocols. The following syntaxes may be used with them:

       ·   ssh://[user@]host.xz[:port]/path/to/repo.git/

       ·   git://host.xz[:port]/path/to/repo.git/

       ·   http[s]://host.xz[:port]/path/to/repo.git/

       ·   ftp[s]://host.xz[:port]/path/to/repo.git/

       ·   rsync://host.xz/path/to/repo.git/

       An alternative scp-like syntax may also be used with the ssh protocol:

       ·   [user@]host.xz:path/to/repo.git/

       The ssh and git protocols additionally support ~username expansion:

       ·   ssh://[user@]host.xz[:port]/~[user]/path/to/repo.git/

       ·   git://host.xz[:port]/~[user]/path/to/repo.git/

       ·   [user@]host.xz:/~[user]/path/to/repo.git/

       For local repositories, also supported by git natively, the following syntaxes may be used:

       ·   /path/to/repo.git/

       ·    file:///path/to/repo.git/

       These two syntaxes are mostly equivalent, except when cloning, when the former implies --local option. See git-clone(1) for details.

       When git doesn’t know how to handle a certain transport protocol, it attempts to use the remote-<transport> remote helper, if one exists. To
       explicitly request a remote helper, the following syntax may be used:

       ·   <transport>::<address>

       where <address> may be a path, a server and path, or an arbitrary URL-like string recognized by the specific remote helper being invoked. See git-
       remote-helpers(1) for details.

       If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you use will
       be rewritten into URLs that work), you can create a configuration section of the form:

                   [url "<actual url base>"]
                           insteadOf = <other url base>

       For example, with this:

                   [url "git://git.host.xz/"]
                           insteadOf = host.xz:/path/to/
                           insteadOf = work:

       a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be rewritten in any context that takes a URL to be
       "git://git.host.xz/repo.git".

       If you want to rewrite URLs for push only, you can create a configuration section of the form:

                   [url "<actual url base>"]
                           pushInsteadOf = <other url base>

       For example, with this:

                   [url "ssh://example.org/"]
                           pushInsteadOf = git://example.org/

       a URL like "git://example.org/path/to/repo.git" will be rewritten to "ssh://example.org/path/to/repo.git" for pushes, but pulls will still use the
       original URL.

REMOTES
       The name of one of the following can be used instead of a URL as <repository> argument:

       ·   a remote in the git configuration file: $GIT_DIR/config,

       ·   a file in the $GIT_DIR/remotes directory, or

       ·   a file in the $GIT_DIR/branches directory.

       All of these also allow you to omit the refspec from the command line because they each contain a refspec which git will use by default.

   Named remote in configuration file
       You can choose to provide the name of a remote which you had previously configured using git-remote(1), git-config(1) or even by a manual edit to
       the $GIT_DIR/config file. The URL of this remote will be used to access the repository. The refspec of this remote will be used by default when you
       do not provide a refspec on the command line. The entry in the config file would appear like this:

                   [remote "<name>"]
                           url = <url>
                           pushurl = <pushurl>
                           push = <refspec>
                           fetch = <refspec>

       The <pushurl> is used for pushes only. It is optional and defaults to <url>.

   Named file in $GIT_DIR/remotes
       You can choose to provide the name of a file in $GIT_DIR/remotes. The URL in this file will be used to access the repository. The refspec in this
       file will be used as default when you do not provide a refspec on the command line. This file should have the following format:

                   URL: one of the above URL format
                   Push: <refspec>
                   Pull: <refspec>

       Push: lines are used by git push and Pull: lines are used by git pull and git fetch. Multiple Push: and Pull: lines may be specified for additional
       branch mappings.

   Named file in $GIT_DIR/branches
       You can choose to provide the name of a file in $GIT_DIR/branches. The URL in this file will be used to access the repository. This file should
       have the following format:

                   <url>#<head>

       <url> is required; #<head> is optional.

       Depending on the operation, git will use one of the following refspecs, if you don’t provide one on the command line. <branch> is the name of this
       file in $GIT_DIR/branches and <head> defaults to master.

       git fetch uses:

                   refs/heads/<head>:refs/heads/<branch>

       git push uses:

                   HEAD:refs/heads/<head>

OUTPUT
       The output of "git push" depends on the transport method used; this section describes the output when pushing over the git protocol (either locally
       or via ssh).

       The status of the push is output in tabular form, with each line representing the status of a single ref. Each line is of the form:

            <flag> <summary> <from> -> <to> (<reason>)

       If --porcelain is used, then each line of the output is of the form:

            <flag> \t <from>:<to> \t <summary> (<reason>)

       The status of up-to-date refs is shown only if --porcelain or --verbose option is used.

       flag
           A single character indicating the status of the ref:

           (space)
               for a successfully pushed fast-forward;

           +
               for a successful forced update;

           -
               for a successfully deleted ref;

           *
               for a successfully pushed new ref;

           !
               for a ref that was rejected or failed to push; and

           =
               for a ref that was up to date and did not need pushing.

       summary
           For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to git log (this
           is <old>..<new> in most cases, and <old>...<new> for forced non-fast-forward updates).

           For a failed update, more details are given:

           rejected
               Git did not try to send the ref at all, typically because it is not a fast-forward and you did not force the update.

           remote rejected
               The remote end refused the update. Usually caused by a hook on the remote side, or because the remote repository has one of the following
               safety options in effect: receive.denyCurrentBranch (for pushes to the checked out branch), receive.denyNonFastForwards (for forced
               non-fast-forward updates), receive.denyDeletes or receive.denyDeleteCurrent. See git-config(1).

           remote failure
               The remote end did not report the successful update of the ref, perhaps because of a temporary error on the remote side, a break in the
               network connection, or other transient error.

       from
           The name of the local ref being pushed, minus its refs/<type>/ prefix. In the case of deletion, the name of the local ref is omitted.

       to
           The name of the remote ref being updated, minus its refs/<type>/ prefix.

       reason
           A human-readable explanation. In the case of successfully pushed refs, no explanation is needed. For a failed ref, the reason for failure is
           described.

NOTE ABOUT FAST-FORWARDS
       When an update changes a branch (or more in general, a ref) that used to point at commit A to point at another commit B, it is called a
       fast-forward update if and only if B is a descendant of A.

       In a fast-forward update from A to B, the set of commits that the original commit A built on top of is a subset of the commits the new commit B
       builds on top of. Hence, it does not lose any history.

       In contrast, a non-fast-forward update will lose history. For example, suppose you and somebody else started at the same commit X, and you built a
       history leading to commit B while the other person built a history leading to commit A. The history looks like this:

                 B
                /
            ---X---A

       Further suppose that the other person already pushed changes leading to A back to the original repository you two obtained the original commit X.

       The push done by the other person updated the branch that used to point at commit X to point at commit A. It is a fast-forward.

       But if you try to push, you will attempt to update the branch (that now points at A) with commit B. This does not fast-forward. If you did so, the
       changes introduced by commit A will be lost, because everybody will now start building on top of B.

       The command by default does not allow an update that is not a fast-forward to prevent such loss of history.

       If you do not want to lose your work (history from X to B) nor the work by the other person (history from X to A), you would need to first fetch
       the history from the repository, create a history that contains changes done by both parties, and push the result back.

       You can perform "git pull", resolve potential conflicts, and "git push" the result. A "git pull" will create a merge commit C between commits A and
       B.

                 B---C
                /   /
            ---X---A

       Updating A with the resulting merge commit will fast-forward and your push will be accepted.

       Alternatively, you can rebase your change between X and B on top of A, with "git pull --rebase", and push the result back. The rebase will create a
       new commit D that builds the change between X and B on top of A.

                 B   D
                /   /
            ---X---A

       Again, updating A with this commit will fast-forward and your push will be accepted.

       There is another common situation where you may encounter non-fast-forward rejection when you try to push, and it is possible even when you are
       pushing into a repository nobody else pushes into. After you push commit A yourself (in the first picture in this section), replace it with "git
       commit --amend" to produce commit B, and you try to push it out, because forgot that you have pushed A out already. In such a case, and only if you
       are certain that nobody in the meantime fetched your earlier commit A (and started building on top of it), you can run "git push --force" to
       overwrite it. In other words, "git push --force" is a method reserved for a case where you do mean to lose history.

EXAMPLES
       git push
           Works like git push <remote>, where <remote> is the current branch’s remote (or origin, if no remote is configured for the current branch).

       git push origin
           Without additional configuration, works like git push origin :.

           The default behavior of this command when no <refspec> is given can be configured by setting the push option of the remote.

           For example, to default to pushing only the current branch to origin use git config remote.origin.push HEAD. Any valid <refspec> (like the ones
           in the examples below) can be configured as the default for git push origin.

       git push origin :
           Push "matching" branches to origin. See <refspec> in the OPTIONS section above for a description of "matching" branches.

       git push origin master
           Find a ref that matches master in the source repository (most likely, it would find refs/heads/master), and update the same ref (e.g.
           refs/heads/master) in origin repository with it. If master did not exist remotely, it would be created.

       git push origin HEAD
           A handy way to push the current branch to the same name on the remote.

       git push origin master:satellite/master dev:satellite/dev
           Use the source ref that matches master (e.g.  refs/heads/master) to update the ref that matches satellite/master (most probably
           refs/remotes/satellite/master) in the origin repository, then do the same for dev and satellite/dev.

       git push origin HEAD:master
           Push the current branch to the remote ref matching master in the origin repository. This form is convenient to push the current branch without
           thinking about its local name.

       git push origin master:refs/heads/experimental
           Create the branch experimental in the origin repository by copying the current master branch. This form is only needed to create a new branch
           or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will work.

       git push origin :experimental
           Find a ref that matches experimental in the origin repository (e.g.  refs/heads/experimental), and delete it.

       git push origin +dev:master
           Update the origin repository’s master branch with the dev branch, allowing non-fast-forward updates.  This can leave unreferenced commits
           dangling in the origin repository.  Consider the following situation, where a fast-forward is not possible:

                           o---o---o---A---B  origin/master
                                    \
                                     X---Y---Z  dev

           The above command would change the origin repository to

                                     A---B  (unnamed branch)
                                    /
                           o---o---o---X---Y---Z  master

           Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed
           by a git gc command on the origin repository.

GIT
       Part of the git(1) suite

Git 1.7.9                                                               02/13/2012                                                             GIT-PUSH(1)

 

【总结】

此处:

git push origin master

的含义,好像是:

把之前建立的,

本地的master

push放到:

远程的origin

上。

转载请注明:在路上 » 【整理】git push的用法/语法/帮助文件

发表我的评论
取消评论

表情

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址
89 queries in 0.214 seconds, using 20.14MB memory